Panasonic TELEPHONE ANSWERING MACHING KX-F115 - Manual (Page 20)

Detailed Operation
How to Operate from a Remote Phone
(com.)
LJJ
Ü
<
s
o
z
QC
UJ
(0
Remote Reset of Tape
To record incoming messages from the beginning of
the tape:
After the recorded messages have been played back
or while they are playing;
1 ^
oeF
3
Push
•The unit will rewind to the beginning of the tape
and a beep tone will be heard, indicating that
the tape has been reset.
After you have used memory playback:
/
\
Push
•The unit will rewind to the beginning of the
newly recorded messages and a beep will
be heard.
2 ^ r^n
I 3 I again to advance to the
Push
beginning of the tape.
Hang up the
To cancel the remote reset:
After hearing the beep indicating that the tape
has been reset, push the [
2 ] button.
•The unit will play back all the recorded
messages again and stop, even if you hang
up the handset. Future messages will now be
recorded after the last previously recorded
ones.
^ Dial the telephone - i For OGM Skip,'!
number with a push the Q
tone telephone only. ^ ^ button. j
—
Push your Code No The unitwill
code number.
V______________ ^________________
play back.
For Momory
Playback,
push (he Q
button.
To (urn on the
SP-Phone,push
(he ^buMon.
To change the OGM
1.
Push the
B button.
2. Record the new
OGM after a long
beep.
3. When finishing,
push iheB button.
•For Back Space,
push the n
button.
•For Skip Forward,
push the B
button.
•To record the ICM
from the
beginning of the
tape; push the Q
button.
•To save the ICM,
hang up after
playback.
•To record a
marker message,
speak after
hearing 2 beeps.
•When you push any button, push Itrmly.
Recording a Marker Message
After playing back all of your messages, you may
leave a message for anyone who has access to your
remote code.
3-beep 2-beep
1 ^--------H
10 -second
marker message
3 beep tones will be heard after the last message has
been played, followed by a 10 second pause, and
then 2 more beep tones.
1 Start Speaking right after you hear the
last two beep tones.
2 When you have finished recording,
hang up the
-19-
How to Change the
Outgoing Message
DIAL THE
PHONE NO.
PUSH GODEÑO. (2 digits)
DURING THE OGM
2 S [3 you hear the beep
Push
tones indicating the number of recorded
messages.
3
Speak clearly and loudly after you hear
one long beep.
4 When you have finished recording the
new OGM, ^ WXY
S
Push
»The new outgoing message will be played back
for confirmation.