Panasonic TELEPHONE ANSWERING MACHING KX-F115 - Manual (Page 9)

Basic Operation
To Correct an Error while'
Programming
CLEAR. i I------------- 1 tVlEMOBY
^ I ------ D instead of until the
Push
MEMORY indicator lights.
•The new entry will be cleared and the previous
storage will remain untouched.
•After pushing the CLEAR button, re-program the
correct number.
Repeat “Storage for Automatic Dialing” or
“Storage for Speed Dialing” on page 7.
To Confirm a Stored Number ^
Repeat the programming procedure using the same
memory station and telephone number.
When the MEMORY button is pushed, a beep will be
heard and the MEMORY indicator will flash.
•twice
•once
The entry is the same as was
previously programmed.
The entry is different from the one that
was previously programmed.
Repeat the programming procedure.
( To Erase after Programming ^
Example:
To erase the number from the upper station
Push
MEMORY
AUTO
/Particular
\Memory Station
ion^
Example:
To erase the number from the memory station [o]
[1
Push
MEMORY
AUTO
/Use Dialing\
\button. /
To Exit the Programming Mode ^
After programming all of the numbers, return
the MEMORY switch to
“SET”.
MEMORY
SET PROGRAM
I®I4
J
Dialing
C
Automatic Dialing
3
To Change a Stored Number } ^ ^
SP-RHONE
1 I
•When you push the SP-PHONE button, the SP-
PHONE indicator will light.
2 S
Push
/ Particular
\Memory Station
) c
speed Dialing
3
Example: Speed dialing the phone number stored in
memory station [o]
1 Lift the !^org>
Push
2 ^
SP'PHONE
I I
MEMORY
AUTO
Í----- 1
OPER
“ O ,
/Useas memory
\ station.
■Helpful Hint-
When you dial by using a lower memory
station, you must first depress the LOWER
STATION button, which will cause the LOWER
STATION indicator to light.
3
m
I"
m
"D
X
o
m
_
0
-