3) vs/vd output connector (vs/vd out), 4) vd output connector (vd out), D ethernet port (ethernet) – Panasonic WJ-SX850 User Manual
Page 3: Rs-232c port (rs-232c), Z) ac inlet socket (ac in)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(3)
VS/VD Output Connector (VS/VD OUT)
Outputs either the VD (Vertical Drive) pulse or the
VS (Video Sync) signal for synchronizing other sys
tem components.
Note: The input at the VS/VD Input Connector is
looped through to this output. These inputs and
outputs are connected internally.
(4) VD Output Connector (VD OUT)
Outputs VD (Vertical Drive) pulses for synchronizing
other system components.
Notes:
• The internal VD pulse or the looped-through
external VD pulse is provided at this connector.
• When the VS signal is supplied to the VS/VD
Input Connector, the VD output signal from the
VD Output Connector will be delayed by
approximately 15 ps with respect to the V-sync
of the VS input signal.
3H
V
vs input signal
VD output signal
r
approx. 15 psec
(D Ethernet Port (ETHERNET)
For exchanging control data with
Processing Unit (CPU) via Ethernet.
the Central
© RS-232C Port (RS-232C)
This port is used only for factory tests.
(Z) AC Inlet Socket (AC IN)
Plug the power cord (supplied as a standard acces
sory) into this socket and connect the cord to an AC
outlet.
-3-