Program – Panasonic RX-DT650 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Recording using an alternative method

(not easy CD recording)

3 2

Tracks on a CD can also be recorded in the following ways.
• CD tracks can be recorded onto the remainder of a recorded tape.
• Tracks can be recorded from the start of the tape’s reverse side.

• Tracks with a long play time can be recorded in their originai

sequence.

Preparation; Insert the CD.

CD

Press CD.

STOP/EJECT

Press Deck 1 STOP/EJECT and
insert the tape.

• insert the tape with the side to be

recorded facing you.

• Either have the leader tape wound up

in advance or locate the position where
recording is to begin. (See beiow).

Program

.1.^ ! r«.'

.•■Í.

l u r ,

%•••.

Only normal tapes can be used with this unit.

Preparation: Take up the leader tape before proceeding.

1

2

Tune in the broadcast station.

(See page 13.)

STOP/EJECT

Press Deck 1 STOP/EJECT and
insert the tape.

Insert the tape with the side to be

recorded facing you.

Press • REC.

To stop the recording:

Press REC to start recording on
the tape.

CD play starts simultaneously.

STOP/EKCT

Press STOP/EJECT.

To take up the ieader tape:

Magnetic part of tape
(Recording can be made.)

Leader tape
(Recording cannot be made.)

To erase sound previousiy recorded on a tape:

Recording new sound onto a pre-recorded tape automatically erases

what was previously recorded.

To erase all the sound on a tape:

1. Insert the tape wth the side whose recording is to be erased facing you.

2. Press TAPE.

REC.

To stop the recording temporarily:

Press PAUSE.

To resume recording, press PAUSE again.

When too much noise is heard whiie recording an
AM broadcast:

FM MODE

/B.P

Set FM MODE/B.P to whichever
position yieids less noise.

The display changes each time the button

is pressed.

BP1 —-

BP2-I

t

1

For your reference:

• Any change made to the volume or tone quality during recording will

not affect the recording.

• In order to prevent trouble caused by flat batteries, it is recommended

that you either supply power to the unit from the household AC

outlet or replace all the batteries with new ones when you are
recording something which is important to you.

Advertising