Connecting the weaker system, Speaker system connection – Panasonic RX-DT650 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the Weaker System
Speaker system connection
This unit can be used as a one-piece portable stereo radio cassette
recorder, or a three-piece component system, by attaching or de
taching the speaker system.
Before attaching or detaching the speakers, be sure to disconnect
the speaker cables from the speaker terminals.
Be sure to press STDBY (!) (AC)/ON to turn the unit off before
connecting or disconnecting the speaker cables.
Attaching the speakers
1.
Align the speaker with the main unit as shown
in the figure, interlock the grooves and press
down.
2.
Connect the speaker cables (black) to the
0
(negative)
speaker
terminal,
and
the
other
speaker cable (red) to the © (positive) speaker
terminal.
3. When using the unit with the speakers attached,
wind the speaker cables as shown.
Since a strong magnet is used for the speaker, keep magnetized
commuter passes, tickets or personal credit cards, recorded tapes,
watches, etc. away from the speaker. The speaker magnet in the unit
may damage them.
Detaching the speakers
Speaker release levers
Unlock the speaker release levers by pulling them
in the direction shown above, and slide each
speaker up.