One time vcr setup (continued), One time, Setup – Panasonic PV-7664 User Manual

Page 14: Continued), Using at 4 ► keys

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

One Time

VCR

Setup

(continued)

When the VCR power is first turned on, the
language select screen appears automatically.

Follow along in the manual as you guided are

through the setup procedure on the screen.

iN^Check list before you begin.

□ All TV and VCR connections are made.

{See pages G'-S.)

Using AT 4keys

Whenever a menu or

^

program screen is displayed,

^

the PLAY. STOP. REWIND,

and FF buttons on the remote
control function as AT only.

For play, stop, rewind, and fast forward

functions, use the buttons on the VCR.

On Screen Language, Cable/ DSS

Receiver Setup, Channels Memory,

and Auto Clock

POWER Turn TV 3nd VCR on.

Tune TV to VCR output channel

{the same one

you set on the back of the VCR: CH3 or CH4).

or

or

VCR/TV

Push CH

A

for

English on-screen

displays.

Push CH ▼ for
Spanish on-screen

displays.

Push VCR/TV for

French on-screen

displays.

SELECT LANGUAGE

PUSH VCR CH

a

: ENGLISH

PULSE VCR CH ▼: ESPAÑOL

APP. VCR/TV ; FRANÇAIS

_________________

If

wrong language

is set, see the
“Reset all VCR

Memory Functions"

section on page 5.

You can also set the language using the buttons on the VCR.

The VCR should be connected to an antenna or
cable box (page 6'-9).

Push AT to select

your hookup, and

then push ► to set.

(Refer to page 12.)

• If you selected CABLE/

DSS BOX^VCR^TV,

continue with step 5.

If not, go to Alternate

Instructions on page 16.

SELECT HOOKUP

ABLE/DSS BOX^VCR^TV

VCF>-CABLE/DSS

BOX^TV

VCRVTV

SELECT:* T KEY

SET :► KEY

END :MENU KEY

•4ÍO o)

a '

SELECT HOOKUP

CABLE/DSS BOX^VCR^TV

CABLE/D5S BOX OUTPUT CH

Push

AT

to select

your cable box or

DSS receiver output

channel number, and

then push ► to enter.

• [f necessary, refer to your ________________

cable box manual.

• If both a cable box and DSS receiver are used,

set the output channel of the DSS receiver.

• If you are using Audio/Video jack connections

to your cable box, select and set “VIDEO OUT”
as the output channel.

SELECT
SET

END

A

T KEY

■< ► KEY

MENU KEY

ENTER CODE NUMBER

REFERRING TO MANUAL

Push

AT

to select

your cable box or DSS

receiver code number,

and then push ► to
enter. (Refer to the list

on page 13.)

• If your cable box or DSS receiver doesn’t

have a remote control, select "NO REMOTE."
Then, go to Alternate Instructions on page 16.

• This determines whether the VCR will control

your cable box or DSS receiver.

SELECT:* T KEY
SET :► KEY

END :MENU KEY

14

Advertising