Г^_|| sgecialvcr^featui, Check list before you begin, Vcr lock feature – Panasonic PV-7664 User Manual
Page 31: To cancel the vcr lock feature, Warning beeper feature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
|[_г^_|| SgecialVCR^Featui^
[^(
□
□
□
Check list before you begin.
All connections are made.
(See pages 6~9.)
VCR is Plugged in.
TV is turned on and set to the VCR
channel (CH3 or CH4).
STOP
^
6 ii>!------------- _____y'i 7
©®o /Г^
.
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature is used to keep children from
operating the VCR.
Hold down STOP on the
VCR for 7 seconds while in
Stop or Power OFF mode.
To Cancel the VCR Lock feature,
hold down STOP on the VCR
1 for 7 seconds again while in
Stop or Power OFF mode.
VCR LOCK ACTIVATED
VCR Lock mode is cancelled automatically
after 24 hours as long as the clock is set.
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
Push MENU to display
the menu.
Push AV to select
“SETUP VCR,” and
then push ► to display
the “SETUP VCR” screen.
MENU
кН4Д11ДЩ:1
SET CLOCK
SET UP CHANNEL
ID10МА/ LANGUE:ENGLISH
SELECT
SET
END
A ▼ KEY
► KEY
MENU KEY
Push
AT
to select
.f “BEEPER,” and then
push ► to select “ON”
or “OFF.”
SET UP VCR
REPEAT PLAY : ON
: ON
SPATIALIZER : ON
SET UP COMMERCIAL ADV.
SELECT:
A T
KEY
SET :► KEY
END :MENU KEY
Push MENU twice to exit
this screen.
31