Preparations, 1 press [c!)/l] to switch on the power, 2 press l^] to open the disc tray – Panasonic DVD-RV40 User Manual
Page 13: 3 place the disc on the disc tray, When a menu screen appears on the tv monitor, Basic play, 1press [c!)/l] to switch on the power. 2 press
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic play
Ga 03
O CD CD
c2»CDCD
CD CD CD
CD
Preparations
• Ensure connections to your television and audio equipment are
correct.
•Turn on your television and other equipment.
(For Australia and N.Z.)
• Switch the video input mode on the television to suit the type of
connection you have made (e.g. VCR 2).
(For the United Kingdom and Continental Europe)
• Select the Audio/Video (AV) position, e.g,, AVI, AV2, which has
been connected to the player.
1
Press [c!)/l] to switch on the power.
2
Press
l^ ]
to open the disc tray.
3
Place the disc on the disc tray.
• Insert inside the guides.
• Do not load more than one disc.
4
Press
[►].
The disc tray is automatically closed and play begins.
i
When a menu screen appears on the
TV monitor
Press the cursor buttons [A,
T, ◄, ►]
and press [ENTER], or press the numeric
buttons, to select the item.
Play of the selected item now begins.
•The cursor buttons are not effective for selecting items for Video
CDs.
B Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
[►►/►►I], [►►! SKIP]: Shows the next menu.
[
SKIP]: Shows the previous menu.
[RETURN]: Shows the menu screen.
[TOP MENU]: Shows the first menu screen. I
DVD |
[MENU]; Shows the menu screen, 'DVDI
• “NO PLAY” is displayed on the FL display if you load the following
kinds of discs and they cannot be played:
•DVD for which playback is prohibited by the initial settings
“2 Ratings” page 28).
•DVD with a region number other than the region number of this
player or “ALL” (• page 6).
•If the disc is put in upside down (and it is a single sided disc).
•When “0" appears on the TV monitor when a button is pressed, the
operation is prohibited by the player or disc.
•When [►] is pressed immediately after a DVD disc is loaded into
the tray, playback will take a little longer to start than when [►] is
pressed from the STOP mode.
It usually takes a little while before picture and sound appear on the
television after [►] is pressed, this is not a malfunction of the player.
• When NTSC DVD/Video CD is played, the picture may roll up or
down on some televisions; adjust this using the vertical hold control
on the television. Televisions not equipped with a vertical hold
control cannot correct this condition. The playback picture may
shrink vertically and black bars may appear both on the top and
bottom of the screen, or the picture may be in black and white. This
does not indicate a malfunction.
VQT8633