Panasonic DVD-RV40 - Manual (Page 37)

Home theatèr
1
SETUP
© 1 Disc Languages
O 2 Ratings
Level 8tf
®3 3 Menu Language English
G® 4 On-Screen Messages
® 5 FL Display
Bright
m,
6 TV Aspect 4:3
^7 Digital Audio Output
m.
8 Speaker Setting 2-channel
9 Other Settings
Press RETURN to exit
.■ © Pigliai Audio Output
' 'CB 1. PCtìDówn&MWtìtsionNo
essi
2 Dolby Digital Bitstream
. HoL 3 DTS Digital SutroiDKl Off
: 4 MPEG PCM
Press RETURN to exit
v__ J
3 C7
4
Sefect the digital output to be output from the optical or coaxiai (DVD-
RV40 only) digital audio output terminal of the player.
1
Press [SETUP] in the stop mode.
The initial settings screen is displayed.
2 Press the cursor buttons [ A , ▼] to se­
lect “7 Digital Audio Output” and press
[ENTER].
3 Press the cursor buttons [A, ▼] to se­
lect the item and press [ENTER].
1 PCWf Down Conversion
Select whether to output audio on DVD recorded in 96
kHz linear PCM as is (No) or to convert it to 48 kHz for
output (Yes).
2 Dolby Digital
To select the signal format (Bitstream or PCM) to be
output from the optical digital or coaxial (DVD-RV40 only)
audio output terminal during playback of DVDs recorded
in Dolby Digital.
3 DTS Digital Surround
To select whether DTS Digital Surround bitstream is
output from the optical digital or coaxial (DVD-RV40 only)
audio output terminal or no digital audio is output during
playback of DVDs recorded in DTS Digital Surround,
4 MPEG
To select the signal format (PCM or Bitstream) to be
output from the optical digital or coaxial (DVD-RV40 only)
audio output terminal during playback of the DVD
recorded in MPEG audio.
4
Press the cursor buttons [A,
▼]
to se­
fect the setting and press [ENTER].
When “1 PCM Down Conversion” is selected
1 No (Factory preset)
No digital audio is output during playback of DVDs
recorded in 96 kHz linear PCM.
•If the DVD is recorded in 48 kHz linear PCM, digital audio
converted to 48 kHz/16 bit is output irrespective of the
setting.
•Audio will be output using the original audio recording
system if the DVD has not been copyright-protected,
2 Yes’^'i
During playback of DVDs recorded in 48 kHz or 96 kHz
linear PCM, digital audio converted to 48 kHz/16 bit is
output.
(Digital output of PCM audio is restricted to 48 kHz/16 bit
or below for copyright protection.)
When “2 Dolby Digital” is selected
1 Bitstream«2 (Factory preset)
Dolby Digital bitstream (1ch-5.1ch) is output during
playback of DVDs recorded in Dolby Digital.
2 PCM
Digital audio converted to 48 kHz/16 bit PCM (2ch) is
output during playback of DVDs recorded in Dolby Digital.
When “3 DTS Digital Surround” is selected
1 Off (Factory preset)
No digital audio is output during playback of DVDs
recorded in DTS Digital Surround.
2 Bitstream‘:2
DTS Digital Surround bitstream (1ch-5.1ch) is output
during playback of DVDs recorded in DTS Digital
Surround.
(Continued on next page)
VQT8633