For your reference – Panasonic DVD-RV40 User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

•Audio is heard at any speed when playing CDs, regardless of any

settings at “2 Audio during Search",

•Audio is not heard at any speed when playing CDs encoded with

DTS, regardless of any settings at “2 Audio during Search”.

• It is recommended that “1 PAL 60” is seiected in “7 NTSC Disc

Output" when a PAL TV Is connected; however, the images shown
below wii! appear on the TV screen. The picture may be
compressed vertically.

For your reference

• l/P/B

To efficiently store video on DVD, common elements among frames

are used in common, and different elements are recorded with each
individual frame. The frame that contains the common elements is
called an l-picture, a complete frame in itself. A P-picture is

calculated from past I or P-pictures. The frame that fills in the

spaces between the l-and P-pictures is called the B-picture.

l-pictures have the best picture quality, so they should be used

when making picture adjustments.

• Frame

Individual images in a video or on the television are called frames.

• Field

Half of the video information (video signal) in a frame is called a

field. With conventional TV systems, a single frame (a single

screen) consists of two fields.

• Frame still

The two fields are displayed alternately on the TV screen, so the

image may be biurry. However, the image quality is better than field
images.

• Field still

Only one field (half of the video information) is displayed on the TV

screen, so the apparent resolution is low. However, there is no

blurring on the screen.

How different kinds of software appear on your television

DVD software is recorded in a variety of picture formats, and how they appear on your TV depends on the software, the kind of TV you have, and the
picture mode your TV is set to.
• Letterbox refers to pictures where black bands appear at the top and bottom.
• Pan and scan refers to pictures where part of the picture is cut off so it fills the whole screen.

The names given to the television picture modes depends on the make of your television. There may also be slight differences in how the pictures

appear on the screen. Refer to your television’s operating instructions for details.

VQT8633

Advertising