Using the menu screen, 1 press the [menu] button, To exit the menu screen – Panasonic PV-DV901 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

u™» —

cnnnnc*"“

2, 3, 4, 5

1 . C A M E R A S E T U P
2 . D I G I T A L E F F E C T
3 . C A R O S E T U P
* , M U I T I ^ P I C T U R E S
5 .

r e c o r d i n g

s e t u p

6 . D I S P L A Y S E T U P

O T H E R F U N C T I O N S

1 .

P L A Y B A C K

F U N C T I O N S

2 - D I G I T A L E F F E C T
3 . C A R D S E T U P
4 .

M U L T I - P I C T U R E S

5 . R E C O R D I N O S E T U P

f i , A V I N / O U T S E T U P

7 . D I S P L A Y S E T U P

I . O T H E R F U N C T I O N S

e

1 , D E L E T E P I C T U R E / T I T L E

2 . C A R D

e d i t i n g

3 . D I S P L A Y S E T U P

4 , O T H E R F U N C T I O N S

Using the Menu Screen

To facilitate the selection of a desired function or setting, this Palmcorder
displays various function settings on menus.

1 Press the [MENU] Button.

• When the (CAMERA] Lamp is on, the Camera Function Menu is

displayed. O

• When the [VCR] Lamp is on, the VCR Function Menu is displayed. 0

• When the [CARD P.B.] Lamp is on, the Card Function Menu is

displayed. O

2 Rotate the [PUSH] Dial to select a desired Sub-Menu.

• Rotate the [PUSH] dial to display the items highlighted.

3 Press the [PUSH] Dial to display the selected Sub-Menu.
4 Rotate the [PUSH] Dial to select the item to be set.

5 Press the [PUSH] Dial to set the selected item to a desired

Mode.

• Each press of the cursor [►] brings up a subsequent Mode. Menu items

that cannot be used in combination with the selected item are displayed
in dark blue.

• While a Menu is displayed, you cannot record or play back. Menus can be

displayed during playback but not during recording.

• The above operations can be carried out using the Remote Controller.

(-►10)

•To display the Menu, press the [MENU] Button 0 on the Remote

Controller.

.

:

•To select items on the Menu, press the [ITEM] Button © on the Remote

Coritroller.

•To set the mode for the selected items, press thé [SET] Button 0 on the

Remote Controller.

To Exit the Menu Screen

Press the [MENU] Button again.

About the Menu Mode Setting

The,setting selected on the Meriu will be retained even when the Palmcorder

is turned off. However, if the Battery or AC Adaptor is disconnected before

Turning the Palmcorder off, the selected setting may not be retained.

15

Advertising