2 insert the supplied cd-rom into the co-rom drive, 6 plug the usb reader/writer for sd memory card's, Usb reader/writer for sd memory card – Panasonic PV-DV901 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Supplied USB Reader/W riter for SD
Memory Card
Using the supplied USB Reader/Writer for SD Memory Card lets you import
the still pictures recorded on the MultiMediaCard or SD Memory Card with
ease into a computer.
Supplied Accessories
1)
USB Reader/Writer for SO Memory Card
2)
CD-ROM
Computer System Requirements
• This Software can be installed in PC/AT compatible personal computers
with Microsoft®Windows®98/Me, Wtndows®2000 preinstalled and
equipped with a USB port.
Disk Drive: CD-ROM drive
Port: USB
I Installing the driver of the USB ReaderAVriter for SD
Memory Card (Windows® 98/Me)
• For users using Windows®2000, please refer to page 46 regarding to
installation.
Start the following installation procedure
without
inserting the USB Reader/
Writer for SD Memory Card into the USB port on the computer. Otherwise
Windows installer will start and the installation process will not be completed
successfully.
• In the case of inserting the USB Reader/Writer for SD Memory Card into the
Computer by mistake, remove the USB Reader/Writer for SD Memory Card
first, and then proceed with the following operations.
1 Turn on the power of the computer, and start Windows.
2 Insert the supplied CD-ROM into the CO-ROM drive.
• (Setup Menu] appears.
3 Click the [USB Reader/Writer] icon on the [Setup Menu].
4 Select [English] on the [Choose Setup Language] window,
and click [OK].
The [InstallShield Wizard] window now appears, and the installation
commences. Follow the on-screen instructions to complete the installation
procedure.
5 When the message indicating that the installation has been
completed appears, click [Finish], and re-start the computer.
6 Plug the USB Reader/Writer for SD Memory Card's
connector O
USB port o on the computer.
The [New Hardware Found] window appears, and the driver is registered
automatically.
7 OF>en [My Computer] or [Windows Explorer] etc., to check
the drive is displayed as a removable disk drive 0
Note:
If a window does not appear automatically, click the “Start” Button on your
desktop and then click “Run”. When the “Run” Box is open, type in
“D;\lnstMenu.exe” and click “OK”. (“D” applies when the CD-ROM drive is
drive D.)
When the Installation is not successful:
Remove the USB Reader/Writer for SD Memory Card from the computer first,
and then proceed with the above operations again.
45