Index search functions, Bf*hotoshot index search, Scene index search – Panasonic PV-DV901 User Manual
Page 30: Top scan
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

2,2
INDEX
SI
index Search Functions
To facilitate searching of desired scene, this Palmcorder automatically
records index signals during recording, as explained in the following.
Photoshot Index Signal
These signals are automatically recorded whenever still pictures are taken in
Photoshot Mode (-> 21).
When recording still pictures using the Continuous Photoshot Mode (-► 21),
the index signal is not recorded.
Scene Index Signal
Scene Index Signals are automatically recorded when you start recording
after inserting a Cassette.
However, if the Palmcorder is switched from the VCR Mode to Camera Mode
or if the date and time is set before the start of recording, the index signal is
not recorded.
• If [INDEX] of [RECORDING SETUP] Sub-Menu on the [CAMERA
FUNCTIONS] Main-Menu is set to [2HOUR], an index signal is recorded
when Recording is restarted after an elapse of 2 hours or longer. If it is set
to [DAY], an index signal is recorded when recording is restarted after the
date has changed since the last recording. (While the index signal is
recorded, the [INDEX] Indication (T) flashes for a few seconds.)
BF*hotoshot Index Search
1 Set [VCR FUNCTIONS] » [PLAYBACK FUNCTIONS] »
[INDEX]» [PHOTO].
2 Press the [►►!] Button O or the [1^^] Button 0 on the
Remote Controller.
• With each press of the corresponding button, still pictures recorded in
Photoshot Mode are searched.
• After Pictures with Sounds are played back for 4 seconds, the Palmcorder
switches to the Still Playback Mode.
■ Scene Index Search
1
Set [VCR FUNCTIONS]
»
[PLAYBACK FUNCTIONS]
»
[INDEX]»[SCENE].
2 Press the [HH ] Button Q
p
>' the [
] Button 0 on the
Remote Controller.
• When the corresponding Button is pressed once, the [S l] Indication
Q)
appears, and searching of the subsequent scene marked with an index
signal starts. Each time the button is pressed after the start of Scene Index
Search the indication changes from [S 2] to (S 9], and the beginning of the
scene corresponding to the selected number will be searched. After
reaching the desired scene, playback starts automatically.
• Up to 9 scene numbers can be selected.
Top Scan
If the [►►! ] Button or the [ W'^] Button is pressed for more than 2 seconds,
the Palmcorder will scan for scenes (or PhotoShots) and playback the first
few seconds of each. (To cancel, press the [►] Button
e
or the [■] Button
' For other notes, see page 52.
30
For assistance, please call: 1-600-211-PANA(7262) or