Resetting the file number, 1 press the [menu] button, 2 press ^ to open the setup menu – Panasonic DMC-LC43A User Manual
Page 77: 3 press a/v to select [no.reset] and then press, 5 press the t/[review/set] button, 6 press the [menu] button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Technicat use
Resetting the File Number
3
iiP.
I|i
BEEP
m
SETUP 2/
1
© CLOCK SET
::NQ.BESEt;
REBET FiLEm
iNTHECAE^EA?:
NO
As the file numbers are recorded sequentially
by the camera, when you use two or more
cards, it may happen that the file numbers on
your cards do not start from
0001
.
Use this function when you insert a new card
or perform the new recording on the recorded
card and you want to start recording from the
file number
0001
.
[Preparation]
• Set the mode dial except for
(P23)
1
Press the [MENU] button.
2
Press ^ to open the setup menu.
3
Press A/V to select [NO.RESET] and
then press
> .
4
When this message is displayed
‘‘RESET FILE NO. IN THE CAMERA?”,
press ◄ to select [YES].
5
Press the T/[REVIEW/SET] button.
6
Press the [MENU] button.
• The menu will disappear.
SELECT^^