Connecting to a pc – Panasonic DMC-LC43A User Manual
Page 80
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Technical use
Connecting to a PC
[Preparation]
• If your PC uses Microsoft Windows® 98 or Windows® 98 Second Edition, a USB
driver must be installed from the CD that is included. If you are using a newer
Microsoft operating system such as Windows® Me, Windows® 2000, or Windows'^
XP {Home Edition/Professional), no USB driver needs to be installed. Your PC
should recognize the camera automatically.
©
1
Insert the Memory Card into the camera, and turn the power switch to
[ON].
2
Connect the camera to a PC via the supplied USB connection cable (T).
[Windows]
The drive is shown on the [My Computer] folder.
• If it is the first time you are connecting the camera to a PC, the required driver is
installed automatically so that the camera can be recognized by the Windows
Plug and Play, then it is shown on the [My Computer] folder.
[Macintosh]
The drive is shown on the screen.
• The flash/access indicator lights during access.
• When the battery power is lost during access, the data may be destroyed. The
battery indicator does not appear. So when connecting to a PC, use the batteries
which the remaining power is enough or AC adaptor (|) (optional, DMW-AC
2
).
• When connecting to a PC, pictures and sounds are not output from the
AN
OUT
socket.
• For further information (software installation), read the supplied operating
instructions for PC connection.
80