Tape operation (continued), Start search, To calculate index number – Panasonic PV-V4520 User Manual
Page 22: Example 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tape Operation (continued)
Direct Access
(For normal and /or timer recordings)
Go directly to desired recording.
Display SELECT SEARCH
MODE
in Stop or Play mode.
Press SEARCH/
2
SELECT SEARCH MODE
ZERO SEARCH
PROGRAM END SEARCH
SELECT:* ▼ KEY
SET :► KEY
END
;SEARCH KEY
Select INDEX SEARCH.
1) Press AT to select.
2) Press ► to display.
3
INDEX
Select the recording number.
Press NUMBERED
keys.
• To calculate number,
see below.
4
INDEX
04
Start search.
INDEX SEARCH 04
Press FF or REW.
■ To Calculate Index Number
Example 1:
If you are watching recording 4 and you want to watch recording 2,
enter 3 in step “3" and press REW.
1
2
3
]
4
5
6
7
Example 2:
If you are watching recording 2 and you want to watch recording 6,
enter 4 in step “3" and press FF.
NOTE: I indicates start points of each recording.
Make each entry within 10 seconds, or the
Index Search mode will be canceled.
If Direct Access or Index Scan is started
very close to an index mark, that index
mark may not be counted in the search.
22
For assistance, call 1-800-211-PANA(7262).