Panasonic PV-M1338 - Manual (Page 12)

W Picture Adjustment
|\X Check list before you begin.
[~1 Ail connections are made (see page 5),
□ Your Combination VCR is plugged in.
1
Press ACTION to display the
MAIN MENU.
2
Press to select "TV,”
and then press ACTION to
display the SET UP TV screen.
SELECT:* T * ► KEY
SET :ACTiON KEY
2
3
4
3
Press A T to select “VIDEO
ADJUST," and then press
► to display the VIDEO
ADJUST screen.
.............. SET UP TV.......................
CAPTI ON
INPLIT SELECT
VIDEO ADJUST
SELECT:* ▼ KEY
SET :► KEY
END :ACT I ON KEY
4
Press A T repeatedly to select
the desired adjust item, and
then press 4^ to adjust. (See
description below.)
To Reset Picture Controls to
the Factory Setting
Press A T and ► to select and
set “NORMAL.”
All controls return to their factory
settings.
,
BRIGHTNESS
PICTURE
SHARPNESS
NORMAL
SELECT:* ▼ KEY
ADJUST :•* ► KEY
END lACTION KEY
COLOR ..................... I........
TINT
I........
BRIGKTNESS .......... i........
PICTURE ............................ f
SHARPNESS ............ I........
SELECT:* T KEY
SET :► KEY
END :ACT I ON KEY
5
Press ACTION three times to return to the normal
screen.
• If no button is pressed within 5 minutes, the video adjust overlay
disappears.
Picture Adjustment
COLOR Control
To adjust the intensity of the color.
TINT Control
To adjust for the most natural fleshtones.
BRIGHTNESS Control
To adjust the brightness of the picture.
PICTURE Control
To adjust the intensity of the picture by adjusting contrast and
color level at the same time and in the proper balance.
SHARPNESS Control
To adjust the sharpness of the picture.
12