Ni copying your tapes (dubbing) – Panasonic PV-M1338 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
o
ni Copying Your Tapes (Dubbing)
Connections you’ll need to make.
• Use this same connection for your video
camera, laser disc player, video games, etc.
Recording(Editing) Combination VCR
1
Insert a pre-recorded tape into the
Playing (source) VCR.
2
Insert a blank tape with record tab
into the Recording (editing)
Combination VCR.
Caution:
Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
3
Select “LINE” as the input on the Combination VCR.
• See "Selecting the Input Mode” section on page 16.
4
Press PLAY on the VCR.
Then,
press PAUSE when the tape reaches the point at
which you want to start copying.
5
Press REC on the Combination VCR, and then
immediately press PAUSE on the remote control.
6
Press PAUSE on both units at the same time to begin
copying.
You can edit out unwanted parts of the original recording
by using PAUSE {on the Recording unit) whiie copying is in progress.
7
Press STOP on both units to stop coovinip.
17