Playback a tape, Kx check list before you begin, Cautioni – Panasonic PV-M1338 User Manual
Page 15: 1 insert a cassette, To find a particular scene during playback, Special effects during playback, Frame bv frame advance, Features for a quality picture, Special effects playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ Playback a Tape
kX Check list before you begin.
Q All connections are made (see page 5).
□ Your Combination VCR is plugged in.
TRACKING Q.J FF/REW
^
^ Search
Cautioni
^
Please inspect your cassette tapes
and remove any loose or peeling
labels to prevent them from
becoming jammed in your unit.
1
Insert a cassette.
• The Combination VCR power comes on automatically.
2
Press PLAY on the remote control or Combination
VCR to start playback.
• Playback begins automatically if cassette has no record tab
(see page 24).
3
Press STOP on the remote control or Combination
VCR to stop playback.
• To rewind the tape, press REW.
4
Press STOP/EJECT on the Combination VCR to
eject the cassette.
• You may eject a cassette with power on or off.
To Find a Particular Scene During Playback
Press REW or FF on the remote control or
Combination VCR to quickly locate a scene.
• Search speed for SLP mode tapes is 21 times the normal speed.
• Some noise bars will appear during search.
Special Effects During Playback
These features work best in SLP mode. The sound will be muted.
Slow Motion Playback
Press SLOW to start slow motion playback. Press PLAY or SLOW to
release.
Still (Freeze) Frame Picture
Press PAUSE to freeze and release the picture.
• To reduce picture noise, first press SLOW. Next, use the 3 or 6
NUMBERED key on the remote control or CH AT on the Combination
VCR to clear up the picture. Now, press PAUSE.
Frame bv Frame Advance
While in Still mode, press SLOW repeatedly or hold down to advance the
still picture one frame at a tirhe. Press PAUSE or PLAY to release.
(After the Combination VCR is in Still or Slow mode for 3 minutes, it will
switch to the Stop mode automatically to protect the tape and the video
head.)
Features for a Quality Picture
Digital Auto Tracking
This feature continuously analyzes the signal and adjusts for optimum
picture quality.
Manual Tracking Control
Use during Playback and Slow Motion mode to reduce picture noise.
Press the 3 or 6 NUMBERED key on the remote control or CH
at
on the
Combination VCR until the picture clears up.
To return to Auto Tracking, press POWER off and then on again.
15