Listening to the recorded messages, Listening to the messages, Re-piaying back all the messages – Panasonic kx t1450 User Manual

Page 10: While listening to the messages

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Listening to the Recorded Messages

•When an Incoming Message has been recorded, the ANSWER/CALLS indicator will

flash. (Three flashes followed by a pause means that 3 messages were recorded.)

• In case of a power interruption, the ANSWER/CALLS indicator will flash slowly after the

power is restored.

Listening to the Messages

1

Press PLAYBACK/PAUSE.

•The playback volume is adjustable using

the VOLUME control (left side on your

unit).

AUTO-LOGIC (One-Touch Operation):
At the touch of the PLAYBACK/PAUSE button, the unit will automatically rewind and
play back all the recorded messages. At the end of the last message, you will hear
3 beeps. After 7 seconds, the unit will reset itself to the Answer mode. All calls will be
automatically saved.

■ Future Incoming Messages will be recorded after the last message.

■ To record the future messages from the beginning of the tape, press the REW

button.

■ To stop the tape temporarily during playback, press the PLAYBACK/PAUSE button

once. The IN USE indicator will flash. The tape will pause until you restart by pressing it
again.

■ To rewind the tape, press the REW button.

■ To fast forward the tape, press the FF button.

Re-piaying Back All the Messages

1

Wait until the ANSWER/CALLS indicator is lit after playing back all the messages.

2 Press PLAYBACK/PAUSE.

•The unit will play back all the recorded messages again.
• If you press the PLAYBACK/PAUSE button before the ANSWER/CALLS indicator is

lit, press the REW button to rewind the tape. Within 7 seconds after rewinding, press

the PLAYBACK/PAUSE button to re-play back all the messages.

- 9 -

Advertising