Monitoring the incoming calls, Erasing the recorded messages – Panasonic kx t1450 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Other Features
Erasing the Recorded Messages
After you have played back the recorded messages, you can erase them by simply
pressing the ICM ERASE button.
1
Press ICM ERASE until a beep is heard.
•The unit will erase the recorded
messages while the tape is rewinding.
tab
NOTE:
The tape can be erased even If the
record-prevention (knock-out) tabs have been
removed.
Monitoring the incoming Calls
While an Incoming Message is being recorded, you can monitor it. Then you may
choose to lift the telephone handset and speak to the caller directly.
1
Adjust the volume control.
If you want to talk to the caller during
recording of the ICM, lift the telephone
handset and talk.
The unit will automatically stop recording and
be ready to answer the next phone call.
- 1 2 -