Cassette tape installation, Preparation – Panasonic kx t1450 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Preparation
Cassette Tape Installation
1
Open the panel, and insert the Outgoing
Message (OGM) and Incoming Message
(ICM) tapes as shown.
•Two cassette tapes are included. Use
C15 for OGM and 060 for ICM.
2
Connect the AC adaptor to the AC outlet,
then set the POWER ON/OFF switch to ON.
•The unit will start to reset the OGM tape.
NOTES:
•3 minutes after connecting the AC adaptor,
the unit will be powered ON automatically
and reset the OGM tape even when the
POWER ON/OFF switch is not set to ON.
•After you have changed the OGM tape:
Press OGM PLAY and REW simultaneously
to reset the OGM tape.
5 -
Advertising