Installation, Television location, Optional cable connections – Panasonic CT-36G23 User Manual
Page 4: Ac power supply cord, Remote control, Cable / antenna, Cable connection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
nstallation
Installation
Television Location
This unit is intended to be used with an optional stand or entertainment
center. Consult your dealer for available options.
□
Avoid excessive sunlight or bright lights, including reflections.
□
Keep away from excessive heat or moisture. Inadequate ventilation
may cause internal component failure.
□
Fluorescent lighting may reduce Remote Control transmitting range.
□
Avoid magnetic equipment, including motors, fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For
best results:
□
Use 75-ohm coaxial shielded cables.
□
Check type of output and input connectors on your components,
n Determine required cable lengths.
AC Power Supply Cord
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT OF AC
OUTLET AND FULLY INSERT. DO NOT USE A PLUG
Polarized plug
WITH A RECEPTACLE OR OTHER OUTLET UNLESS
THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE. FOR SOME MODELS THAT ARE NON-POLARIZED, THE
USE OF AN AC ADAPTOR CONNECTOR MAY BE NECESSARY.
Remote Control
The
Remote Control Quick Reference Guide
is located within the package
provided with this TV.
Cable / Antenna
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local
cable company.
Note:
A cable converter box may be
required for proper reception. Check
with your local Cable company for
compatibility requirements.
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV