Pip operation with a vcr - no cable box, Procedure, Pip) o – Panasonic CT-36G23 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
icture
I
n
P
icture
(PIP) O
peration
PIP Operation with a VCR - No Cable Box
This television includes a Picture In Picture (PIP) feature. A second video
source (VCR) is required to provide a second picture.
Connect your television to a VCR, as shown. (Some models have only one
video input Md some models have an S-VIDEO input.).
TERMINALS ON BACK OF TV
VCR
Note:
The Remote Control must be programmed with the supplied codes
to operate the VCR. See Programming the Remote Control in the
Remote Control Quick Reference Guide.
Procedure
Turn the VCR OFF and tune the TV to channel 3.
Press the PIP button on the Remote Control to display the PIP frame
on screen.
Note:
The PIP picture Is the same as the.Main picture, initially.
•
Press the TVA/IDEO button on the Remote Control to select
the VIDEO PIP source.
•
Press the VCR button on the Remote Control and turn ON
the VCR.
•
Press the TVWCR button on the Remote Control.
•
Choose
channels
for
PIP
frame
by
pressing
VCR
CHANNEL up/down buttons on the Remote Control.
•
Choose channels for the
Main Picture
by pressing the TV
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.
©