Picture in picture (pip) operation, Pip operation with a vcr and cable box, Procedure – Panasonic CT-36G23 User Manual
Page 7: Pip) o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
P
icture
¡
n
P
icture
(PiP) O
peration
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature. A second video
source (VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown. (Some models
have only one video input and some models have an S-VIDEO video input.)
TERMINALS ON BACK OF TV
VCR
CABLE BOX
Note:
The Remote Control must be programmed with supplied codes to
operate the VCR and Cable Box. See
Programming the Remote
Control
in the
Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
•
Press the TVA/IDEO button on the Remote Control to select
the video PIP source.
Note:
Verify the CABLE BOX and VCR are ON and the VCR
tuned to
channel 3.
•
Choose channels for the
PIP
frame by pressing the CABLE
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
•
Choose channels for the
Main Picture
by pressing the TV
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.