Speaker impedance, For your reference – Panasonic SAGX690 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

■V' X.-' '

r

y- _.y~.

Connection of surround speakers

For SA-GX690/GX490

Right speaker
(not included)

Left speaker

(not included)

Connection of center speaker

BEO

Before sound can be heard, the SURROUND mode or 3 STEREO
mode (of the Doiby Pro Logic system) must be on.

For SA-GX690/GX490

Center speaker
(not included)

For SA.GX390

Center speaker
(not included)

Speaker cabie
(not included)

This unit

Speaker cabie
(not inciuded)

For SA-GX390

■ speaker impedance

The impedance of any speaker used with this unit must be 8—16 Q.

Connection of subwoofer

SA-GX690 only

Right speaker
(not included)

Left speaker
(not included)

1. Before sound can be heard, both surround speakers must be

connected.

2. Do not connect the surround speakers to the front speaker ter­

minals. The surround speakers may be damaged if connected
to the front terminais due to the output power difference bet­

ween the front and surround terminals.

■ Speaker impedance

The Impedance of any speaker used with this unit must be 4 -16 Q.

The subwoofer is connected when bass sounds are inadequately

reproduced because front speakers are too small.

When connected, the subwoofer can be placed in any position.

This unit has no amplifier section designed especially for the sub­
woofer, so it is necessary to purchase a subwoofer with a built In

amplifier or buy the two separately.

Subwoofer with built-in
amplifier (not included)

Stereo connection cabie
(not included)

This unit

TI

Connecting a subwoofer which does not have

a built-in amplifier

Connect an optional amplifier to the "SUBWOOFER’' terminals of

this unit and then connect a subwoofer to the speaker terminals
of the amplifier.

For your reference:

The level of sound output from the subwoofer will always be at

80 Hz or less, regardless of the settings of the speaker select but­
tons on this unit, thus the intensity of the tow frequency range will
be maintained.

When adjusting the volume of the subwoofer

After setting the volume control on the subwoofer or on the

amplifier which is connected to the subwoofer, make any further
adjustments with the volume control on this unit.

11

Advertising
This manual is related to the following products: