Panasonic SAGX690 - Manual (Page 15)

Preset tuning
By presetting the desired broadcast stations into the memory
channels of this unit, broadcast stations can be selected simply
by pressing numeric button(s). (Refer to page 16 for tuning.)
rBeiore presetting-
How many broadcast stations can be preset?
For United Kingdom
A total of 30 FM, MW and LW stations can be preset.
For Australia and N.Z.
A total of 30 FM and AM stations can be preset.
How is presetting done?
The two following methods are available.
• Automatic memory presetting
Automatic memory presetting allows this unit to automatical­
ly search for broadcast stations and then preset them into
memory.
With this function, searching proceeds from the frequency
currently being displayed and continues through higher fre­
quency, and broadcast stations are preset In the order In
which they are located.
With this method, the channels that can be preset Into the
memory are set as follows for different bands.
For United Kingdom
Channel
1 2 2021 2627 30
-__________ ki
•------ LW------- *
lA/_________ ..
-FM------------------------------------►
For Australia and N.Z.
Channel
1 2 20 21 |30
----------------------------------- FI
Ali
---------------------------------- *
For example, after presetting the FM band, If the MW (or
AM) band is preset, the previous presettings in the sections
in the above illustration which overlap will be erased and the
subsequent settings will be preset, therefore, the FM band
stations will be kept for channels 1 —20 and the MW (or AM)
band stations will be preset to channels 21 —30.
> Manual memory presetting
The desired broadcast stations can be preset Into the
desired channels by the user.
This can also be used as a method for changing selected
broadcast stations that were preset in “Automatic memory
presetting”.
If a new broadcast station is preset into a channel, the set­
ting for the broadcast station which was previously entered
in that channel will be automatically erased.
Automatic memory presetting
UJ
Set to the frequency from
which you want to start
automatic memory preset­
ting.
(See page 14.)
S7 MEMORY I Press MEMORY until the fre­
quency begins to change.
(Automatic memory presetting will
start.)
During automatic memory presetting,
the memory indicator will flash while
the frequency scrolls.
Flashes
at
UU II I
O U. I Uw
To stop, press MEMORY once again.
When a broadcast station is preset
The memory Indicator and the preset channel number will be
displayed for approximately 1 second.
------------------------
r / /
‘L I I
Lights up
When presetting is completed
The last broadcast station to be preset will be displayed.
Frequencies may not be preset correctly in cases where the
broadcast waves are too strong or too weak, in such cases, carry
out presetting manually.
m