Additional information, Massage point priority display, Advanced use of the user program function – Panasonic EP3203 User Manual

Page 23: What kind of data can be recorded

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Additional Information------------------------------------------

Detailed Information regarding User Adjustment Functions

(1) What happens when I press ?

• The program will be changed so that the overall amount of time spent on that particular area during the program is

increased.

• The massage action at the time when the button was pressed will first be repeated.
• The massage action at the time when the button was pressed will be increased in that area when that same

massage action is carried out within the massage program.

• The overall time of the massage (approximately 15 minutes) will not be increased.
• This function cannot be used in the Self Program.

position

(2) What happens when I press ‘V’’ ?

• The point where the massage is currently being carried out will be changed slightly.
• This is to ensure that the correct acupressure points can be reached on people with different physical characteristics,
• The button can be pushed once in each direction. This moves the

Acupressure

massage heads approximately 11/16" (1.8 cm) up or down and

Points

approximately 1/4" (0.6 cm) left or right from the center of the pre-

Approx'w

programmed acupressure point.

ijjl

^%.6cm)

• The new point will be recorded and whenever that point is massaged

8 cm)

during a program the massage heads will automatically move there.

• The new point is used in all programs.

(The information recorded in each User Memory Button is independent of other User Memory Buttons.)

Approx. 11/16" (1.8 cm)

Approx. 1/4"

(0.6 cm)

Massage Point Priority Display

When (3) is pressed or adjustments are made to the user data the results are shown in the

Massage Point Priority Dispiay.

►focus
►fatigue

iiljji. 1

ill»

2

iiijH" 3
iiH» 4

’ The amount of time that will be spent on each point during the next massage is displayed.
’ The higher the level, the longer the amount of time that will be spent on that point.
’ The number of levels is an indication only and is not necessarily an exact indicator of the proportion of

time that will be spent on each point.

Advanced Use of the User Program Function

• Programmed Operations were created by professional massage therapists in accordance with the aim of each

program. While based on these programs, the User Adjustment Functions allow users to modify the massage
parameters. Therefore, it is not possible to focus on one particular area using this function (e.g. the shoulders)
during a single massage. If you want to focus on one particular area then please use the Self Program or the
Manual Operation.

What Kind of Data Can Be Recorded?

Recordable Data

• The five Programmed Operations can be recorded in each of the User Adjustment Functions buttons.

(The massage actions of Programmed Operations. The data from the previous Self Program.)

• Data regarding physical characteristics.

(When the User Adjustment Functions button is pressed and the massage begins, body searching is carried out in
accordance with this data and if that data matches then the massage begins. If it does not match then body

searching is carried out again.).

The following are not recorded as part of the User Adjustment Functions:
• Data regarding Manual Operations.
• Massage lounger position (reclining angle and legrest angle).
• Data regarding the leg/calf massage.
• When Manual Operation has been selected during a Programmed Operation.
• Massage strength settings in the Programmed Operations.
• When the massage has been stopped by pressing ^ and the massage terminated.

21

Advertising