Panasonic EP3203 - Manual (Page 27)

Leg/Calf/Seat Massage
Preparation
Adjust the angle of the legrest and slide before starting a massage.
• It is also possible to adjust the legrest and slide
during a massage
ottoman
Air will be released while you are pressing Q .
Please change the position of your legs while air
is being released.
vyhen you want to massage the
soles of your feet and your calves.
1. Press 1,
vyhen you want to massage your
legs from your ankles to your calves.
■ Sole/Leg/Calf/Seat Area
Selection Buttons
3. Select the area and massage type you require.
• The areas and massage actions you have selected will be shown on the display. (See below.)
Auto Grasp Squeeze
• If you press one of the Sole/Leg/Calf/Seat Area Selection Buttons first then the massage action will be set to Auto.
• If you press one of the Sole/Leg/Calf/Seat Massage Type Selection Buttons first then the entire lower body will be selected.
• You can change to a different massage or a different area during the massage. If you change the massage or area then
the air will be completely released before the massage begins again.
If you press one of the Sole/Leg/Calf/Seat Massage Type Selection Buttons while carrying out
Sole/Leg/Calf/Seat massage at the same time as carrying out back massage, the air massage wiil be
terminated and only the back massage will continue.
• If you press one of the Sole/Leg/Calf/Seat Massage Type Selection Buttons while carrying out only a Sole/Leg/Calf/Seat
massage, then the massage will not stop.
To stop the massage please press @ or ®.
4. Adjusting Massage Strength.
• Massage strength can be adjusted in three stages.
intensity
intensity
legs
Press as many times as you like until you reach the required strength.
• When the strength of the massage has reached its limit you will hear a “beep-beep-beep” sound.
• The strength of the massage will be shown in Program Strength/Speed Display.
25