Panasonic Convertible Camera AW-E800 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTION OF DEVICES WITH CAMERA PAN/TILT CONTROL SYSTEM
To connect the pan/titi unit to the camera, use the
pan/tilt unit cable AW-CA50T15.
Power is supplied from the pan/tilt unit,
1. Before connecting them, press the power
switch on the pan/tilt unit AC adaptor and the
ON/OFF switch on the hybrid control panel in
the OFF position, respectively,
2. Fix the camera securely to the pan/tilt unit using
the mounting adaptor,
3. Connect the 50-pin end of the pan/tilt unit cable
to the l/F Remote connector on the camera.
Connect the 15-pin end of the cable to the
pan/tilt unit,
4. Connect the pan/tilt unit to the hybrid control
panel with the 10BASE-T cable and coaxial
cable. For details, refer to the manual for the
hybrid control pane),
5. First switch on the pan/tilt unit AC adaptor, then
press the ON/OFF switch on the hybrid control
panel in the ON position. The camera and pan/
tilt unit can now be controlled from the hybrid
control panel.