Panasonic Convertible Camera AW-E800 - Manual (Page 25)

Minimize the carrier wave using
the red & blue gain controls
■ RESETT0 3 200KOR5 600KWHITE
BALANCE
When the white balance setting is set to either T SET
3 200K" or “P SET 5 600K" the white balance will be
automatically set to the color temperature 3 200K or
5 600K, respectively.
■ BLACK BALANCE ADJUSTMENT
• Close the lens.
If the motor drive tens is controlled from the cam­
era, the lens Is automatically closed when the black
balance is adjusted,
• When the camera is used without a RCU or RGB,
R/B pedestal adjustment of painting setting will be
automatically reset to ±0 after setting the black bal­
ance. (painting setting in only USER MODE.)
[ADJUSTMENT by CAMERA]
Press the YES/ABC Switch for over 2 seconds and the
black balance will be set automatically in 10 seconds.
In user mode, black balance fine adjustment can be
performed with the red pedestal/blue pedestal setting
after setting the black balance.
[ADJUSTMENT with the RCU (RGB, Hybrid control
panel)]
Set the AUTO set switch to ABC and the black balance
will be automatically set. While the system is being set,
the auto warning indicator (LED) blinks and it goes out
when the black balance setting is completed. If the
lamp remains lit, ABC should be tried again.
-
23
-