Gamma correction level setting [gamma: 0.35 - 0.55, White clip level setting [white clip, Flare correction level setting [flare r/g/b – Panasonic Convertible Camera AW-E800 User Manual

Page 47: Black stretch setting [black stretch: on/off, Pc control access speed setting [baud rate, 1 200bps/2 400bps/4 800bps/9 600bps, Negative/positive selection [nega/posi: posi/nega, Note, Aspect ratio selection [aspect ratio: 16:9/4:3, Fan on/off [fan: on/off

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

(G-R):

To increase or decrease the intermediate

color between green and cyan

(G-B):

To increase or decrease yellowish green

(B-R):

To increase or decrease the intermediate

color between blue and cyan

(B-G):

To increase or decrease purple

© Gamma Correction Level Setting

[Gamma: 0.35 - 0.55]

Gamma correction level can be set.

® Knee Compensation Level Setting [Knee Point:

88% - 98%/Dynamic]

88% - 98%:

The level of video signals subject to

knee compensation (knee point) can be set.

Dynamic:

Knee compensation level is automatically

adjusted according to the scene.

® White Clip Level Setting [White Clip:

95% -110%]

The peak level of video signals to be white-clipped
can be set,

® Flare Correction Level Setting [Flare R/G/B:

0

-

100

]

Flare correction level can be adjusted.

* Flare correction level has already been adjusted

prior to shipment from the factory.

® Black Stretch Setting [Black Stretch: ON/OFF]

Black stretch to correct the suppression of black

portions at low luminance can be set to ON or OFF.

® PC Control Access Speed Setting [Baud Rate:

1 200bps/2 400bps/4 800bps/9 600bps]

This setting is to select a communication speed in
controlling the camera from the computer.

® Negative/Positive Selection [Nega/Posi:

Posi/Nega]

Posi:

Normal image

Nega:

Image is shown reversed in darkness and

color.

_ Note------------------------------------------------------------------------

When an option card is added, only the composite

output and Y/C output will be reproduced in nega­
tive image.

® Aspect Ratio Selection [Aspect Ratio: 16:9/4:3]

© Fan ON/OFF [Fan: ON/OFF]

The cooling fan can be turned off if fan noise is dis­
turbing in a studio, for example.

-

45

-

Advertising