Uonneciions/mmai ьетир (ready to play), Connecting, Initial setup (ready to play) – Panasonic PV C2063 User Manual
Page 8: Connections/lnitial setup (ready to piay), Uonneciions/mmai ьетир, Ready to play)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
uonneciions/mmai ьетир
(Ready to Play)
Please make al! cable or antenna connections before power on.
Connecting
For ANT./Cabie
Connect the cable from Antenna/Cabie
to the VHF/UHF terminal on the unit.
For DSS/Cabie Box
Connect the OUT jack on your cable
box to the VHF/UHF terminal on the unit
with a RF cable.
WARNING:
Overtightening “Nut type” RF coaxial cables
may damage jacks. Finger tighten only.
Initial Setup (Ready to Play)
Press COMBO on the remote for Combo mode.
UNIT (rear view)
8
1
Plug the unit power cord into AC wall
outlet.
Press POWER*
on the remote or unit.
The unit comes on and auto channel and
clock set starts. ____________________
If you use a cable box, turn
it on and set it to the Public
Broadcasting Service (PBS)
channel in your time гопе.
If you use a DSS receiver, It
must be turned off.
ri i Atrio 5—; ri'íoíiíiífflSéí;
iiK«2ÉÉÜi;4S.;;;
Settings are made automatically. When
setup is done, this screen appears.
................ :Ü58T,)0NV-
tSpriNe;;
.■ í CÓIilÍ4.ÉlBlSríV:b
if AUTO CLOCK SET IS INCOMPLETE screen
appears, set the clock using MANUAL CLOCK
SET procedure on next page.
; ■ ■UAuTC.iGf.LOCiri
•;:|F
i m
. is ijNv.òP.Pl E"
vir
Ж i=ìv
• Function buttons are inoperative during Initial
Setup.
• To remove a cassette during Auto Set, press
EJECT twice on the remote or STOP twice on
the unit. In this case, settings must be made
manually. (See page 10.)
• Depending on conditions, Auto Clock Set may
take longer than 30 minutes. If so, press STOP
to stop setup and perform settings manually.
(See page 10.)
For assistance, please call: 1 -800-211 -PANA{7262) or send e-mail to : consumerproducts© panasonic.com