Panasonic PV C2063 - Manual (Page 9)

Manual Clock Set
If AUTO CLOCK SET was incomplete, manually
set the clock as follows.
1 Press ACTION ors the remote to display
SET CLOCK Menu screen.
2 Press A T to select the month and
press ^ to set. !n the same manner,
select and set the date, year, time, and
DST. (Daylight Saving Time)
Press ACTION twice to start CLOCK and
exit.
SELECT/SET
A:CH UP
▼ :CH DOWN
► :VOL UP
:VOL DOWN
Reset all unit Memory Functions
When moving unit to a new location, or if a mistake
was made in the Initial Setup section.
• Make sure a tape Is not inserted in the unit.
unit for more than 5 seconds.
• The power will shut off.
• Please ignore “NO CASSETTE”
warning.
3
Do “Initial Setup” on page 8.
Note to CABLE System Irtstaller
This reminder is provided to call the CABLE
(Cable TV) System Installers attention to
Article 820-40 of the NEC that provides
guidelines for proper grounding and, in
particular, specifies that the cable ground
shall be connected to the grounding system
of the building, as close to the point of cable
entry as practical.