Accessories, Connection, Basic connection – Panasonic DVDXV10 User Manual
Page 4: Q connection
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Accessories
1 Remote control
(N2QAJB000037)
tl
0}
t
S
to
O)
.c
£
«
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
□ 1 AC mains lead
2 Batteries
for remote control
□ 1 Audio/video cable □ 1 Cleaning cloth
(VJA0788-D)
—
(RFE0088-1)
Connection
For Australia and N.2-
(RJA0035-K)
larnEH
(RJA0019-2X)
Gsa
The included AC mains lead is for use with this unit only.
Do not use it with other equipment.
Basic connection
This page explains how to connect the unit to a television and set it up so you hear the audio through the television’s speakers. To get the full benefit from
the powerful 5.1-channel audio found on DVDs, you should connect an amplifier and six speakers {-»page 5),
Before connection
•Disconnect the AC mains lead
Conrtect your unit direcdy to your television.
• Refer to the television’s operating instructions.
Co not connect the unitdirough your video cassette recorder when
setting up your home entertainment system, because the picture
may not be played correctly due to the copy guard.
Television
" AUDIO
IN
L (OK
VIDEO '
IN
R p
@
_2_J
red white yellow
Audio/video cable
(included)
S VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
signals. (Actual results depend on the television.) Television
S video cable
(not included)
S VIDEO
IN
.. j
'jii When making this connection, ensure you connect the audio cables
II V to the corresponding audio input terminals on the television.________^
FOR
THE
UNITED
KINGDOM
ONLY
READ
THE
CAUTION
FOR
THE
AC
MAINS
LEAD
ON
PAGE
3
BEFORE
CON
NECTION.
To household
mains socket
t
AC mains lead
(included)
-■■"-A
For Asia. Australia and N.Z.
COMPONENT VIDEO OUT terminal
Connection using these terminals outputs the color difference signals
(P
b
/P
r
) and luminance signal (Y) separately in order to achieve high
fidelity in reproducing colors.
•The description of the component video input terminals depends on
the television or monitor (e.g. Y/Pa/Pa, Y/B-Y/R-Y, Y/C
b
/C
r
). Connect
to terminals of the same color.
Television
Video cable
(not included)
dp-
=<fiT> ■
=(0 ■
^<=Q¡Z> ■
COMPONENT
VIDEO IN
® V
P
b
(O) Pfl
When making this connection, ensure you connect the audio cables
V, to the corresponding audio input terminals on the television.
I
(The illustration shows the model for the United Kingdom,
< Continental Europe and Russia.)
For the United Kingdom, Continental Europe and Russia
SCART terminal
•To improve picture quality, you can change the video signal output
from the AV terminal from “Video" to either “S-Video" or “RGB" to suit
the type of television you are using (• page 16, Video—AV Output),
Television
SCART
terminal
VCW
Í^
нd
У
qodddo
ÍI
mooonanooDoJJ
21-pin SCART cable
(not included)
-------- Í?-----------
t