If security indicator (g) is displayed, Select your application, Y display the shut down screen – Panasonic TOUGHBOOK CF-37 User Manual

Page 16: 2 confirm shut down, I restarting your computer (without shutting down), Х 5 ё, Starting up/shutting down

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

starting Up/Shutting Down

If security indicator (g) is displayed,

you must first enter your password. (O’ *^nuar "Security Measures")

Upon entering your
password and press­

ing C Enter J.

If correct password is input.

1

Over three incorrect attempts,

or no pa.ssword ¡s entered for about a minute,

Will Not Starf^

* If iit'ler ihrec ailcnipls the correct password is not input, or if no password is

entered for about a minute, the computer returns to the condition just before the
attempt was made to start up the computer.

When an application or file that was previously displayed

appears on your screen,

the suspend or hibernation function has been set. (O’

"Suspend/Hibernation

Functions")

Select your application

You are able to start working on your computer.

X

note

)----------------------------------------------------------------------------------------------------- •

• The petwer saving function is factory set, so if there is no input from a key. the touch

pad, or the touchscreen for two minutes. The LCD is powered off (ECO mode).
The LCD will resume operation when the touch pad or the touchscreen is used
or a key is pressed. We recommend using a key that will not result in an input

from the keyboard, such as (Shift).

[System Devices] in [Start] - [Settings] - [Control Panel] - [System] - [Device

Manager] may contain a device or devices bearing an exclamation mark or ques­
tion mark. This does not indicate a malfunction. Such a mark (exclamation or
question mark) will not be displayed if the operating environment of the device
showing the mark is corrected, by for instance installing the driver of the device.

Shutting Down (power off your computer)

This procedure is shutting down without using the suspend or hibernation function.

(Q^

"Suspend/Hibernation Functions")

y Display the shut down screen

After saving important data and closing each application, select [Shut Down] from
the [Start] menu.

Х5Ё!>

From the keyboard,

You may choose to press down on [ ^ ] , then select the menu with or

2

Confirm shut down

Select [Shut down], then press jOKj. Your computer will power off automatically,

(III the OPK .stiiie. it you are not recharging ytmr battery pack or if the pack is fully charged, your com­
puter consumes approximately 1.5 W.)

I Restarting your computer

(without shutting down)

Select jOK) after .selecting [Restart],

/Nori>

To quickly resume computer operation after shutting dovrn,

The suspend or hibernation function is available. (Q=

"Suspeiid/Hi-

bemation Functions")

16

Advertising