Panasonic TOUGHBOOK CF-37 - Manual (Page 7)

Saving Data on the Hard Disk
Do not expose your computer to shock.
Please use care when handling your computer, shock may damage your hard disk or make
your software applications and data unusable.
Do not power off your computer while software applications are running or HDD
indicator (^) is on.
Properly shut Windows* down to avoid problems ([Start] - [Shut Down] ).
Save all valuable data to disks.
Backing up data to disks will limit damage should trouble occur to your computer or should
you inadvertently change or erase data.
Use the security function for all important data. (C^ "Security Measures")
* This computer uses Microsoft® Windows® 95 Operating System.
Saving Data on Disks
X note >
In this manual, the followings are described as disks.
When using disks, an optional SuperDisk Drive Pack (CF-VFS371/CF-VFS372) is needed.
SuperDisk (120 MB)
Floppy disk (720 KB, 1.44 MB)
---------------------------------------------------------------------------------------------------------------------------- -
I Do not power off your computer or press the SuperDisk drive eject button while the
MP indicator (^) is on.
Doing so may damage the data on the disk and render the disk useless.
I Use care when handling disks.
To protect the data on your disks or to prevent a disk from becoming stuck in your com­
puter, avoid the following:
• Sliding the shutter on the disk manually.
• Exposing the disk to a magnetic field.
• Storing the disk in locations prone to high temperatures, low pitched noise, dampness, or dust.
• Applying more than one label on the disk.
> Confirm the contents of a disk before formatting it.
Confirm that no important data is on the disk, because all data on the disk will be erased.
Use the write-protect tab.
This is a must for preserving impor­
tant data. This prevents your data from
being entsed or overwritten.
Write-protect Tab
Write Enable Write Disable
Computer Viruses
Users are advised to purchase the latest versions of virus protection software and use
them regularly.
We recommend you run the software:
• When booting your computer.
• After receiving data.
We recommend that you check data received on disks or from external sources, such as
data downloaded from the Internet, e-mail, etc. (For compressed files, please uncompress
them before running a check).
LCD Panel
High-precision and advanced technologies are necessary in the production of color liquid
crystal displays (color LCDs). Therefore, if 99.998% or more of the picture elements are
functioning properly, no defect is considered to exist.