Panasonic KX-P 1131 - Manual (Page 38)

Paper Specifications
Paper which may be used with this unit must be within the specifications provided below.
Fanfold Paper
Width: 102-254 mm (4-10")
Quality and number of sheets:
Type of paper Sheets
Weight
lbs. g/m2
Fine-quality paper 1 16-24 60-90
Non-carbon 2-5 11-14 (17*) 41-53 (64‘)
Multi-layered with carbon 2 11-14(17*) 41-53 (64*)
(*only for the last sheet)
n
Note:
• To insure optimum print quality, 60-82.5 g/m^ {16-22 lbs.} is recommended for graphic printing.
• In multi-layered paper with carbon, the carbon is equivalent to a sheet of paper.
!
• “Weight in pounds” represents the weight of 500 [432 x 559 mm (17 x 22")] sheets. (
• The printer will handle multipart forms up to 0.36 mm (0.014") thick. Up to 5 copies of 14 lbs. chemical release j
paper can be used. |
Single Sheet
Width: 102-297 mm (4-11.7")
Height: 127-363 mm (5-14.3")
Weight in pounds (g/m^): 53-90 g/m^ (14-24 lbs.}
Note:
• Paper should be within operating temperature and humidity ranges at least 24 hours prior to use.
• Due to letter head varying in paper weight and construction, we cannot guarantee print quality and paper
handling for all types.
Envelope
#6 and #10 size envelopes are recommended. Since envelopes vary in size, paper weight and construction, we
cannot guarantee print quality and paper handling for all types of envelopes.
I Note:
I
• To optimize print quality, printing should not occur in areas where the edges overlap.
38