Panasonic SX-MB100 - Manual (Page 18)

Selecting sounds
There are 150 difierent sounds permanently stored in this instrument to enhance your playing enjoyment.
« This operation is not possible when the FM TUNER or BEAT MASTER mode is selected.
Sounds
1 .Press the SOUND button. Use the number buttons to
select a sound number (three digits).
• A SOUND list is printed on the control panel. For a
detailed list of the sounds, refer to the separate Ref­
erence Guide provided.
--------- SOUND/RHYTHM SELECT ---------------
0 1 3 3 o oooo
SOUND + 4 5 6
^ lO o o o
^'o
6 6 6
• Enter three digits to specify the sound. For example,
for sound number003, press 0, 0, 3. Forsound number
030, press 0, 3, 0.
• The + and - buttons can be used to increase or
decrease the number. When a button is pressed and
held, the numbers change quickly.
• If you wish to cancel the number you are in the midst
of entering, press the + and - buttons at the same
time (CANCEL). If you pause in the midst of entering
a number, the entry may automatically be canceled
after a few seconds.
•
• The selected sound number and sound name are
shown on the display,
<Display exampte>
001 Grand Piano
i~~S0UND I
2.Play the keyboard.
• Non-pitched (percussion) sounds are also available.
Touch
You can add dynamics to the sound by varying the key­
board touch.
• The initialized setting is ON.
=>Use the TOUCH button to switch between ON and
OFF.
O
When set to on, TOUCH is shown on the display.
This function is also effective in the BEAT MASTER
mode.
Pad Bank
The different types of phrases are classified into banks
in the PERFORMANCE PADS. When you switch to a
different bank, the phrase in each pad button changes.
>Change to a different bank with the + and - buttons
beneath the pad buttons.
A
PADS BANK list is printed on the control panel.
While you are selecting a different bank, the name of
the current bank is shown on the display.
18
QQTG0626