Panasonic SX-MB100 - Manual (Page 26)

storing FM station settings
store the settings for your favorite FM stations so they are easy to recall.
• This operation is enabled in the FM TUNER mode.
• For basic radio operation, refer to page 17.
Storing a station setting.
1. Press the FM TUNER button to turn it on.
5. Press the EXECUTE button.
ao ao
2. Use the FM TUNING + and - buttons to select an FM
radio station.
<Display example>
a
tu K kj
B
• You can also use the auto tune feature to automatically
find a station, (Refer to page 17.)
3. Press the MEMORY (PLAY MODE) button.
O
PLAY MODE
iMEMORY
4. Use the ITEM buttons, below the display to the left, to
select a channel for the station (1 to t2).
<Display example>
Flashing
• "COMPLETED!” is shown on the display.
• The storing procedure is completed, and the instru­
ment exits the store memory mode. Note that if the
EXECUTE button is not pressed, the preset channel
is not stored, and after a few seconds the instrument
exits the store memory mode.
6. Repeat steps 2 to 5 to store station settings in each
preset channel, as desired.
Recalling stored station settings
1. Press the FM TUNER button to turn in on,
2. Use the PRESET TUNING buttons to select a preset
channel.
<Display example>
26
QQTG0626