Scsi id number and terminator, Setting – Panasonic KXL-D740 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SCSI ID Number and Terminator
■
SCSf ID number:
Each SCSI device connected to your computer system has an individual ID number (refer
to the respective manuals). Be sure that the CD-ROM SCSI ID number does not conflict
with another SCSI device connected to the computer system. Normally personal
computer’s SCSI ID number Is set to 7.
The factory setting of the player’s SCSI ID number is set to 5.
■
Terminator:
Set the Terminator switch ON or OFF according to the player’s condition.
ON:
when the player is connected to the computer system.
OFF:
when using independently as an audio player (power consumption can be
saved) (
d
S" P. 25).
The factory setting is
ON.
Setting
Set the ID number switch (1 ~3) or Terminator switch (4) ON/OFF by using a pointed object
like a pen, and referring to the table below (for ID number).
(For SCSI ID number setting)
ID number
ID number switch
1
2
3
0
OFF
OFF
OFF
1
ON
OFF
OFF
2
OFF
ON
OFF
3
ON
ON
OFF
4
OFF
OFF
ON
5
ON
OFF
ON
6
OFF
ON
ON
7
ON
ON
ON
I I: Factory setting.
34