Dial sound eq to display “al eq, Varymg, Sauna qualify wim fhe acamtk imag& (all equalizer – Panasonic SCAK75 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
varymg
me
sauna qualify wim
fhe acamtk imag& (All equalizer
The Al equalizer uses the SOFT, SHARP, HEAVY and LIGHT
sound quality coordinates to achieve subtie sound quality settings
with ease.
Press the SOUND EQ joystick to turn on the
equalizer.
The SOUND EQ tamp lights more brightly, and '‘FLAT” is
cleared.
Dial SOUND EQ to display “Al EQ”.
When it is turned clockwise, the settings are selected in the fol-
fowing sequence.
® HEAVY
^
@ CLEAR
(3) SOFT
(D DISCO
® LIVE
® HALL
® MANUAL
® Al EQ
operate
the
SOUND
EQ
joystick
and
set
the
sound quality as desired.
® ^------ > direction: SOFT-SHARP setting
@ i t direction: LIGHT-HEAVY setting
Repeat steps ® and @ to set the desired sound quality.
The original display is restored on the display panel in about
5 seconds. Only one Al EQ lamp lights to give a rough indica
tion of the coordinate position.
The sound quality can be re-selected using SOUND EQ while
the lamp is alight.
To release the equalizer
Press SOUND EQ joystick so that “FLAT” is displayed.
•The sound quality setting is stored automatically. It is recalled
when “Al EQ” is next selected.
• All recordings are performed at the flat setting even if an alterna
tive sound quality setting has been selected.