Panasonic SC-CH60 - Manual (Page 38)

Tape-to-tape recording
from deck 2 to deck 1-------------------
Making a Recording
(continued)
The recording level and the noise reduction effect of the original
(playback) tape will be recorded on the new tape just as they were in
the original recording.
1
Press the TAPE input seiect button.
2 insert the piayback cassette into deck 2 and the
cassette you are recording on (the editing tape)
into deck 1 .
The normal grade of tape is recommended.
Check to see that the tape’s erasure prevention tabs (see page
53) are intact, and then insert the cassette into deck 1.
Vou cannot record on the leader tape (the first few revolutions)
so take up the leader tape in advance. (See page 37.)
Press EDiTiNG SPEED to select editing speed.
Each time you press,“EDIT HI” is dispiayed on and off to show
the editing speed.
When you wish to record at high speed (about 1.7 times normai
speed), press to display “EDIT HI".
When you wish to monitor the sound at a normal speed while
recording, press to go off the "EDIT HI” indication.
Press PAUSE on deck 1 , then press RECORD.
The recording indicator will start flashing.
I
I DECK 1 I —KHi — \ h l 6 K 2 )
^ITT>H
MAX
/
n n r
1
I I I l _
VOLUME