Panasonic SC-DV150 - Manual (Page 58)

© How to hold discs
® Do not touch the recorded surface.
© How to clean discs
@ Wipe from inside outward
® How to take up tape slack
® Side A
©Tab for side “B" ©Tab for side "A" ^
© To re-record
© Normal position tape ® High-position tape
© Detection hole
filali
With this system, you can only play discs having these marks.
ICCHWMCT
I
ÌH
Ém
[DIGITAL VlMOi
However, do not use irregular shaped discs. Discs of the sort can
damage the unit. 10
DIGITIU.AUC10
Handling precautions UHÏ1
• If you are taking the disc from a cold to a warm environment, mois­
ture may form on the disc. Wipe this off with a soft, dry, lint-free
doth before using the disc.
• Do not write on the label side with a ball-point pen or other writing
instrument.
• Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
• Do not attach labels or stickers to discs. (Do not use discs with ex­
posed adhesive from tape or left over peeled off stickers.)
• Do not use scratch-proof protectors or covers other than those
specified for use with this system.
Starage precautions
Be sure to store discs in their cases to protect them from dust,
scratches, and warping.
Do not place or store discs In the following places
• Locations exposed to direct sunlight
• Humid or dusty locations
• Locations directly exposed to a heat vent or heating appliance
• In the glove compartment or on the rear deck of an automobile
Selecrion of cassette tapes
Tapes can get caught on the capstans. Use caution with the following
types of tapes.
Cassette tapes exceeding 100 minutes
Tapes are made of a thin film material. Do not repeatedly advance
and stop the tape, fast-forward it or rewind it.
Endfess-tapes
For this unit, it is recommended to use tapes which are appropriate to
the auto reverse mechanism.
Always read the instructions provided with your tapes.
Tape slack H
Tape slack may cause the tape to break.
Erasure prevention Q
Use a screwdriver or similar object to break out the tab.
To re-record on a protected cassette
Cover the hole with adhesive tape.
Do not cover the detection hole on high-position tapes.
Storage precautions
4)
V
I
«fi
&
Do not place or store tapes in the following places;
• in high temperature (35°C or higher) or high humidity (80% or
higher) areas
• In a strong magnetic field (near a speaker, on top of a TV, etc.) * •
This can erase a recording.
• Locations exposed to direct sunlight pqtso 52