Journals and lists – Panasonic PANAFAX UF-550 User Manual
Page 148
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
► Journals and Lists
Explanation of Contents
(1) Indication of communication mode
(2) Start time of communication
(3) End time of communication
(4) File number
(5) Station number
(6) Communication result
(7) Abbreviated number or S mark
(8) Recorded name in One-Touch,
ABBR. or direct dialling number
(9) Number of pages transmitted or
received
(10) Duration of Communication
001 to 255 (When the communication is stored into memory, a file number
is assigned for each communication.)
Sequential number of the Stations.
”OK” indicates that the communication was successful.
’’BUSY” indicates that the communication has failed because of busy line.
"STOP” indicates that STOP was pressed during communication.
”M-OK” indicates that the substitute reception message in memory was not
printed out.
"P-OK” indicates that memory overflow or document misfeeding occurred
while storing the documents into memory for transmission but successfully
stored document(s) was sent.
”R-OK” indicates that the Relayed XMT or Confidential Communication was
successful.
”3-digit Info Code” (see page 155) Indicates that the communication has failed.
In this case, the machine will print out the attached report with first page of your
document as shown on the previous page.
: S mark indicates dialed by direct number dial.
The 3-digit number is the number of pages successfully transmitted or
received.
When the documents are stored into memory, two 3-digit numbers wilt appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of pages
that were attempted to be transmitted.
146