Halftone, Verification stamp, Basic transmission settings – Panasonic PANAFAX UF-550 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
► Basic Transmission Settings
Halftone
The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is
preset to HALFTONE = Off. You can select either Fast mode or Quality mode.
Press
HALFTONE to:
1=1 FAST
1=1
QUALITY
HALFTONE
1 ~ I
HALFTONE = Off
C= FAST
7«^ QUALITY
HALFTONE
HALFTONE = Quality
\ I ^
-■■-FAST
t=i
QUALITY
HALFTONE
L
HALFTONE = Fast
m
Note: When you select HALFTONE, FAST or QUALITY, your machine will automatically select Fine Resolution.
Verification Stamp
The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small
<S>
mark.
Press I STAMP I to:
STAMP
/ *^AMP
T
STAMP = Off
STAMP = On
m
Note: 1. When you store a document in memory, the Verification Stamp will stamp on the document if it is
successfully stored in memory. In this case the Verification Stamp is not a confirmation that the
document was successfully transmitted. If you wish to disable the use of the Verification Stamp when
storing document in memory, change the setting of Fax Parameter No. 28, see page 36.
2. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04, see
page 35.
42