Panasonic PANAFAX UF-550 - Manual (Page 39)

Customizing Your Machine
^
No. Parameter
Setting
Number
Setting Comments
37 RCV TO MEMORY
(--)
Enters 4-digit password used to print out the received document
in memory by F8-5 (RCV TO MEMORY). When F8-5 is set to On,
this parameter will not be shown on the LCD display, (see page
86)
38 FAX ACCESS CODE
(--)
Enter a 4-digit Fax Access Code to secure the machine from
unauthorized use. (see page 84)
40 RELAY XMT REQUEST 1 Invalid Selecting whether or not the machine performs Relay XMT
Request, (see page 128)
2 Valid
41 CONF. FAX
PARAMETER
1 Invalid Selecting whether or not the machine performs Confidentiai
Network Communication, (see page 124)
2 Valid
42 CONF. POLLED FILE
SAVE
1 Invalid Selecting whether or not the machine saves the confidential
polled file even after the file is polled once.
2 Valid
43 PASSWORD-XMT 1 Off Settings 4-digit XMT-Password and selecting whether or not the
machine performs and checks the XMT-Password of the
receiving station when transmitting, (see page 112)
2 On
44 PASSWORD-RCV 1 Off Settings 4-digit RCV-Password and selecting whether or notthe
machine performs and checks the RCV-Password of the
transmitting station when receiving, (see page 112)
2 On
46 SELECT RCV 1 Invalid Selecting whether or not the machine performs selective
reception, (see page 111}
2 Valid
48 TELEPHONE LINE 1 PSTN Selecting the type of line connected.
2 PBX
49 PSTN ACCESS CODE 0— Setting PSTN Access Code. (max. 4 digits)
50 FLASH KEY 1 Earth Selecting to use FLASH on control panel either as Earth key or
Flash key.
2 Flash
52 DIAGNOSTIC
PASSWORD (--)
Setting the password for Remote Diagnostic Mode. Please ask
your Panasonic Authorized Dealer for details.
53 SUB-ADDRESS
PASSWORD (-*)
Setting a 20-digit password for secured sub-address
communication.
54 FAX FORWARD 1 Invalid Selectingwhether or notthe machine performs the Fax Forward.
(UF-770 only, see page 93)
2 Valid
55 OMR-XMT 1 Off Setting the home position of the OMR-Transmissionparameter
in the Select Mode, (see page 91)
2 On
56 COVER SHEET 1 Off Setting the home position of the Cover Sheet parameter in the
Select Mode. (See page 89)
2 On
Continued on the next page.
37