System connections – Panasonic WV-BM1900 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SYSTEM CONNECTIONS
1. Single Monitor Connection
•
Connect the Video Input Connector (11) on this
monitor to the Video Output Connector of the cam
era with 75-ohm coaxial cable.
•
Set the Video Termination Switch (13) to the
75ii position.
•
Set the Sync Selector Switch (16) to the I NT posi
tion.
2. Muitipie Monitor Connection
First Video Monitor
Conneci the Video Input Connector (11) on this
monitor to the Video Output Connector of the cam
era with 75-ohm coaxial cable.
-
7
-
Advertising