Selecting the chorus type [chorus type, Setting range, Setting the chorus depth [chorussend – Yamaha CLP-970AM User Manual
Page 74: Setting the chorus on/off [chorusonoff, Selecting the variation effect type [variationtype, Setting the chorus on/off [chorusonof, Setting the chorus depth [cho russend
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Detailed settings for the voices [VOICE SETTING]
In Dual mode:
A
B
- +
■ Mainjiatfir Set?--> ■
NO YES
|Ret«rb5end<E.PianDl)
2&M
- +
C
D
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 - 127
Selecting the chorus type [Chorus
Type]
You cannot set this parameter for the voice parts “Left” and
“Left X Layer.”
See the procedure on page 66.
Setting range:
Chorus Adds a rich, spacious sound.
Celeste Adds swell and a spacious sound.
Flanger Adds swell effects of an ascending or
descending jet plane.
Setting the chorus depth [Cho
rusSend]*
See the procedure on page 66.
A
- +
■Main
Set^H
B
- +
NO YES
1ChorusSend
48 ■
- ^
C
- +
D
In Dual mode:
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 - 127
Setting the chorus on/off
[ChorusOnOff]
You can set the [CHORUS] button on or off for each
voice. When you select a voice, the chorus on/off set
ting for the voice automatically changes according to
this parameter.
Even if this parameter is turned on, the chorus effect is dis
abled if the ChorusSend parameter is set to 0.
See the procedure on page 66.
Setting range:
On/Off
Selecting the variation effect
type [VariationType]
You can select other effects (than reverb and chorus).
See the procedure on page 66.
74
CLP-970A
TIP
TIP