Uibraphonerotorspeed, Setting range, Selecting a type of auxiliary pedal [auxpedaltype – Yamaha CLP-970AM User Manual
Page 83
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the speed of vibraphone's
vibrato effect [VibraphoneRotor
Speed]
This parameter enables you to set the speed of vibrato
when you select the Vibraphone voice and use a vibe
rotor pedal.
[UibraphoneRotorSpeed
- +
NO YES
D
Setting range:
1 - 10, Off
Selecting a pedal function for
vibraphone
[VibraphonePedalMode]
This parameter enables you to select whether the
sound is sustained while you press the keys on the key
board (“PianoLike”) or the sound is sustained only
while you press and hold down the sustain pedal, like
playing a real vibraphone (“Normal”).
A
> ^
■UibraphonePedalMode ■
B
- +
NO YES
C
B PianoLikeB
^ +
D
Setting range:
PianoLike, Normal
Normal setting:
PianoLike
Assigning the START/PAUSE func
tion to a pedal [PedalStart/
Pause]
If you assign the START/PAUSE function to a pedal and turn
the function On, the pedal function assigned to the pedal in
the Voice Setting menu (pages 75 and 76) is disabled.
Select a pedal to assign the function. Set to On or Off.
Setting for:
Left, Middle, AUX
Setting range:
On/Off
Normal setting:
Off for all pedals
Selecting a type of auxiliary pedal
[AuxPedalType]
A pedal connected to the [AUX PEDAL] connector
may switch on and off differently. For example, some
pedals turn on the effects and others turn them off
when you press them.
Use this parameter to reverse this mechanism.
A
B
■ñii>^edalT^pe
Makel
NO YES
-
^
C
D
Setting range:
Make, Break
CLP-970A
83
TIP
A
B
C